

Location: Home > Dissolvable Magnesium Alloys OEM & Rubbers > Dissolvable Frac Balls > Dissolvable Frac Plugs OEM-KF43

Product Categories

Dissolvable Frac Plugs OEM-KF43

Total investment over 240 Million RMB.
Over 200 employee, including 30+ engineers/scientists.
Annual production: 20,000 tons of magnesium alloys.
Full-cycle production: casting, extrusion, machining and surface treatment.
Independent research and development of more than ten kinds of dissolvable magnesium alloy brands.

• Just as you would create custom designs for cost and time saving purposes.

• The ability to save you further time and expense by offering numerous post-extrusion magnesium product fabrication processes in-house.

• Meifu Technology specializes in the following, but are not limited to, custom magnesium fabrication capabilities.

Advantages of Magnesium Extrusions:

• Full set of extrusion dies: can extrude various sizes of Dissolvable-Mg bars.

• Broad material selection.

• Wide application suitability.

• Excellent controllability of dissolution rate.

• Low cost.

Grade	Mechanical Properties at Room Temperature						Dissolution Rate		Dissolvable Magnesium Alloy Type
	Min. Tensile Strength		Min. Yield Strength		Min. Elongation	Hardness	Dissolution Rate
	MPa	Ksi	MPa	Ksi	%	HB	Test Conditions	mg/(cm2*h)
KF-96	380	55.2	300	43.5	5	96	93℃ 3%KCL	40-65	High temp./strength
KF-98	450	65.3	350	50.8	3	98	93℃ 3%KCL	30-60
KF-982	450	65.3	350	50.8	3	98	93℃ 3%KCL	15-23
KF-989	320	46.4	250	36.3	5	98	90℃ 3%KCL	100-120
KF-916	380	55.2	260	37.7	3	101	50℃ 0.84%KCL	20-35
KF-916	380	55.2	280	40.6	3	101	93℃ 3%KCL	90-130
KF-55	280	40.6	250	36.3	5	70	93℃ 3%KCL	90-110
KF-88	120	17.4	80	11.6	35	65	93℃ 3%KCL	200-400	Low temp./ultra-high ductility
KF-105	250	36.3	180	26.1	12	75	93℃ 3%KCL	30-55	High temp./ductility
KF-85	250	36.3	180	26.1	12	64	93℃ 3%KCL	40-70
KF-75	310	45	220	31.9	5	75	93℃ 3%KCL	55-80
KF-75	310	45	220	31.9	5	75	50℃ 0.84%KCL	15-25
KF-73	310	45	220	31.9	5	70	93℃ 3%KCL	40-70
KF-741	300	43.5	250	36.3	6	70	93℃ 3%KCL	130-220
KF-741	300	43.5	250	36.3	6	70	50℃ 0.84%KCL	5-30
KF-63	210	30.5	150	21.8	15	62	93℃ 3%KCL	70-100	High temp./ultra-high ductility
KF-631	150	21.8	90	13.1	20	58	93℃ 3%KCL	45-75
KF-613	150	21.8	90	13.1	24	55	93℃ 3%KCL	20-55
KF-34	310	45	220	31.9	5	75	93℃ 3%KCL	200-400	Regular
							50℃ 0.84%KCL	75-115
							50℃ 0.1%KCL	40-60
KF-74	290	42.1	250	36.3	6	70	93℃ 3%KCL	200-400
							50℃ 0.84%KCL	80-110
							50℃ 0.1%KCL	40-70
KF-43	220	31.9	180	26.1	8	64	93℃ 3%KCL	120-160
							50℃ 0.84%KCL	25-65
							50℃ 0.1%KCL	5-30
KF-23	240	34.8	200	29	5	64	93℃ 3%KCL	300-450
							50℃ 0.84%KCL	50-120
							50℃ 0.1%KCL	30-70
KF-13	240	34.8	200	29	5	55	93℃ 3%KCL	500-800
							50℃ 0.84%KCL	90-180
							50℃ 0.1%KCL	40-80
KF-14	240	34.8	200	29	5	55	93℃ 3%KCL	600-800
							50℃ 0.84%KCL	120-300
							50℃ 0.1%KCL	45-100
KF-15	240	34.8	200	29	5	55	93℃ 3%KCL	700-1000
							50℃ 0.84%KCL	150-350
							50℃ 0.1%KCL	55-110

Previous:Az31b Extruded Magnesium Alloy Welding Wire

Next:MF-E30857 Dissolvable Rubber

Inquire Now

Related Recommendations